hpfall

hpfall is a simple daemon providing HDD shock protection for HP laptops supporting the feature officially called "HP Mobile Data Protection System 3D" or "HP 3D DriveGuard".

Installation

Install hpfall-git^AUR.

Configuration

You need to set your HDD in /etc/conf.d/hpfall.

If your HDD is /dev/sda, your configuration file should look like this:

/etc/conf.d/hpfall

#
# Parameters to be passed to hpfall
#
DEVICE=/dev/sda

Start and enable hpfall.service

Testing

After reboot with new kernel, check if hp_accel driver was initialised correctly:

# dmesg | grep hp_accel

Testing Shock protection

Warning: Be careful while performing this test and keep your laptop above something soft. Simulating free fall over the desk is bad idea.

Find your HDD's unload_heads file:

Go to its directory and run:

Lift your laptop into free space and simulate a free fall while holding it firmly with your hands (~10 cm should be enough). If the disk protection works, you should hear your HDD making "click" sound and see one of your laptop's LEDs flashing. The watch value's background should also permanently turn black.

This article is issued from Archlinux. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.